Nema34 Easy Servo Motor 8.5N.M with 1000PPR encoder
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Product Introduction:closed loop motor system,nema 34 easy servo
ECON offers hybrid servo motors (stepper motors with encoders) from NEMA 23 to 42 with torque up to 12 Nm .These hybrid servo motors are integrated with 1,000-line incremental encoder.
When driven by ECON's hybrid servo drives, the system can fully close the position loops between the drive and motor and eliminate loss of movement synchronization with features of no loss of steps and no torque reservation. Compared with servo systems, easy servo systems have much higher low-speed torque that servo systems lack, significantly lower cost, no overshooting, and no hunting.
ECON’s easy servo motors can also be implemented as standard stepper motors with encoders, and driven by stepper drives with the option of output encoder signal to a motion controller, PLC, or external device.
This series easy servo motors are available in NEMA 23 to 34 frame sizes with 0.9 - 12 Nm torque. It was designed to be powered by ECON’s series easy servo drives taking max 80 DC / AC voltage input.
Product Technique Feature:closed loop motor system,nema 34 easy servo
Step Accuracy 5%
Encoder 1000PPR
Step Angle 1.8º
Insulation resistance 500VDC100MO Min
Insulating strength 500VAC 50Hz 1mA 1 Min
Environment temperature -20~+40ºC
Temperature rise 80ºC Max
Dimension
Product Technical Data:closed loop motor system,nema 34 easy servo
|
Model |
Holding Torque(N.M) |
Current /Phase(A) |
Resistance (O) |
Inductance (MH) |
Rotary Inertia (g.cm²) |
Length (MM) |
Weight (Kg) |
Matched Drive |
|
TC86-85 |
8.5 |
6 |
0.5 |
6.5 |
3600 |
118 |
3.8 |
TS808D/TS808Ah |
|
Motor encoder outlet definition(DB15 Pin male connector) |
|
|
PIN |
Definition |
|
1 |
EA+ |
|
2 |
VCC |
|
3 |
GND |
|
11 |
EB+ |
|
12 |
EB- |
|
13 |
EA- |
Favorites
